Subject | Chinese | English |
tech. | 上屈服应力 | upper yield stress |
met. | 上屈服点应力 | upper yield stress |
met. | 下屈服应力 | lower yield stress |
met. | 下屈服点 | lower yield point |
tech. | 不屈服 | unyielding (的) |
met. | 不屈服 | no yield |
gen. | 不屈服 | stand fast |
tech. | 不屈服挡土墙 | non-yielding retaining wall |
gen. | 不屈服的地 | pat |
archit. | 不屈服的 | unyielding |
tech. | 不屈服的 | non-yielding |
gen. | 不屈服的 | unbowed |
gen. | 不屈服的 | unbroke |
gen. | 不屈服的 | unbent |
gen. | 不屈服的 | nonyielding |
gen. | 不屈服的 | insubordinate |
met. | 不连续屈服 | discontinuous yielding |
auto. | 临界屈服应力 | critical yield stress |
met. | 二次屈服条件 | quadratic yielding condition |
expl. | 产率、产量、屈服 | yield |
met. | 亨基屈服准则 | Hencky yield criterion |
chem. | 亨基屈服条件 | Hencky's yield condition |
tech. | 位移屈服点值 | yield point value of displacement |
polym. | 低屈服点 | lower yield point |
met. | 低屈服点合金 | low yield alloy |
met. | 低屈服点钢 | low yield point steel (【技】屈服点相对较低的钢。这种钢具有优良的深冲性能,容易变形加工制造形状复杂的制品。08 F 钢是典型的低屈服点钢。屈服点只有 176MPa 左右。用这种钢的薄板可制造深冲压和深拉延制品。) |
dril. | 低剪切率流变性屈服点 | low shear rheology yield point |
archit. | 迫使… 屈服<#1> | bring... to his knees |
archit. | 使屈服 | bend |
gen. | 使屈服 | prostrate |
amer. | 使屈服 | take the starch out of |
gen. | 使屈服 | flatten |
tech. | 保证屈服应力 | guaranteed yield stress |
tech. | 保证屈服强度 | guaranteed yield strength |
tech. | 假定屈服应力 | constrained yield stress |
construct. | 假定条件屈服限 | constrained yield stress |
tech. | 假定屈服限 | constrained yield stress |
met. | 全屈服 | full yielding |
tech. | 全面屈服 | general yield |
avia. | 全面屈服断裂力学 | general yielding fracture mechanics |
dril. | 内屈服压力 | burst internal yield |
tech. | 内屈服压力 | internal yield pressure (深钻工艺) |
tech. | 分布屈服 | distributed yielding |
tech. | 初始屈服值 | initial yield value |
tech. | 初始屈服曲率 | curvature at first yield |
tech. | 初始屈服荷载 | initial yield load |
expl. | 初始屈服载荷 | initial yield load |
polym. | 剪切屈服 | shear yield |
chem. | 剪切屈服 | shear yielding |
steel. | 剪切屈服点 | shear yield point |
expl. | 动态屈服强度 | dynamic yield strength |
tech. | 动力屈服点 | dynamical limit of yield point |
tech. | 动力屈服点 | dynamic limit of yield point |
avia. | 动态屈服 | dynamic yield |
met. | 动态屈服应力 | dynamic yielding stress |
tech. | 动态屈服强度 | dynamical yield strength |
tech. | 动态屈服强度 | dynamic yield strength |
dril. | 卡森屈服应力 | Casson's yield stress |
tech. | 压力屈服点 | compression yield point |
met. | 压缩屈服 | compressive yield |
polym. | 压缩屈服应力 | compressive yield stress |
met. | 压缩屈服强度 | compressive yield strength |
met. | 压缩屈服点 | compressive yield point |
tech. | 压缩屈服点 | yield point for compression |
polym. | 压缩屈服载荷 | compressive yield load |
tech. | 压缩时屈服强度 | yield compression strength |
tech. | 反向屈服 | reverse yielding |
tech. | 受压屈服点 | compressive yield point |
construct. | 受拉拉力 屈服点 | tension yield point |
tech. | 受拉屈服点 | tension yield point |
dril. | 可控屈服强度 | controlled yield strength |
tech. | 名义屈服应力 | nominal yield stress |
polym. | 后屈服 | post yield |
met. | 哈菲尔德时间•屈服试验 | Hatfield time-yield test |
met. | 哈菲尔德时间-屈服试验 | Hatfield time-yield test |
tech. | 基底屈服点 | yield of base |
met. | 塑性屈服 | plastic yielding |
auto. | 塑性屈服变形,流动 | plastic yield |
tech. | 塑性屈服值 | plastic yield value |
tech. | 塑性屈服应力 | plastic yield stress |
tech. | 塑性屈服点 | plastic yield-point |
dril. | 非牛顿流体的塑性黏度-屈服值之比 | plastic viscosity to yield value ratio |
earth.sc. | 泥浆的塑性黏度-屈服值比 | plastic viscosity to yield value ratio |
tech. | 增加的屈服值 | increased yield value |
met. | 大范围屈服 | large-scale yielding |
tech. | 大范围屈服 | large region yield |
met. | 大面积屈服 | large-scale yielding |
tech. | 套管屈服破坏 | casing yield breakdown |
tech. | 套管钢材最小屈服强皮 | casing steel minimum yield strength |
tech. | 完全塑性屈服 | perfect plastic yield |
polym. | 宏观屈服 | macroscopic yielding |
met. | 宏观屈服应力 | macroscopic yield stress |
tech. | 实腹复合结构的屈服点安全 | yield safety of solid-web composite structures |
tech. | 实际屈服应力 | actual yield stress |
tech. | 实际屈服点 | true yield point |
tech. | 实际屈服点 | actual yield point |
polym. | 宾厄姆屈服值 | Bingham's yield value |
chem. | 宾厄姆屈服值 | Bingham yield value |
gen. | 对挑战俯首屈服 | take a challenge lying down |
met. | 小范围屈服 | small-scale yielding |
tech. | 小范围屈服 | small-scale yield |
tech. | 小范围屈服理论 | yield theory of small scope |
met. | 小面积屈服 | small-scale yielding |
tech. | 局部屈服 | local yield |
gen. | 屈服 | flow |
gen. | 屈服 | genuflection |
gen. | 屈服 | give |
gen. | 向…屈服 | give in (to...) |
gen. | 屈服 | lout |
gen. | 屈服 | douse sail |
gen. | 屈服从 | stoop |
gen. | 屈服服从于 | submission (to) |
gen. | 屈服 | throw down one's arms |
gen. | 屈服点,极限 | yield |
gen. | 屈服点 | yielding |
gen. | 屈服从 | pass under the yoke |
gen. | 屈服从 | come under the yoke |
expl. | 屈服cave 的 ing 形式 | caving |
gen. | 屈服 | yield submission |
busin. | 屈服 | bend |
met. | 屈服 | yielding |
econ. | 屈服 | give way |
dril. | 屈服值 | yield |
econ. | 屈服 | submit |
gen. | 屈服 | vail |
archit. | 屈服 | creep |
archit. | 屈服 | bow |
gen. | 屈服于 | succumb (to) |
gen. | 屈服 | subdual |
gen. | 屈服 | strike sail |
gen. | 对权力、法律等的屈服 | nonresistance |
gen. | 屈服 | lie down |
gen. | 屈服 | give way (to) |
gen. | 屈服 | genuflexion |
gen. | 屈服 | genuflect |
gen. | 屈服 | crumple |
gen. | 屈服 | bend over |
gen. | 屈服 | cave-in |
gen. | 屈服 | climbdown |
gen. | 屈服 | eat crow |
gen. | 屈服 | buckle under |
gen. | 使屈服 | bend |
gen. | 屈服 | give in |
tech. | 屈服上限 | upper yield point |
tech. | 屈服上限 | maximum yield |
gen. | 屈服屈从于 | yield (to) |
commer. | 屈服于 | yield |
gen. | 屈服于… | knuckle under to... |
gen. | 屈服于 | submit to |
gen. | 屈服于 | underlie |
gen. | 屈服于… | knuckle down to... |
gen. | 屈服于 | bow to |
gen. | 屈服于 | bow before |
tech. | 屈服伸长 | yield elongation in tension |
polym. | 屈服伸长率 | elongation at yield |
tech. | 屈服伸长 | elongation at yield (率) |
tech. | 屈服伸长度 | elongation at yield |
tech. | 屈服伸长点 | yielding point elongation |
tech. | 屈服位移 | yield displacement |
tech. | 屈服位置 | yielding locus |
met. | 屈服值 | yield value |
tech. | 屈服值 | elastic limit value |
steel. | 屈服准则 | yield criterion |
expl. | 屈服函数 | yield junction |
avia. | 屈服函数 | yield function |
tech. | 屈服刚度比 | yielding stiffness ratio |
tech. | 屈服判别式 | yield criterion |
met. | 屈服判据 | yield criterion |
met. | 屈服前应变 | preyield strain |
met. | 金 屈服前微应变 | preyield microstrain |
met. | 屈服前微应变 | preyield micro-strain |
dril. | 屈服剪切应力 | yield shear stress |
expl. | 屈服力 | yield force |
auto. | 屈服力矩螺栓常用于气缸盖、连杆和曲轴轴承盖 | torque-to-yield bolt |
tech. | 屈服加速度 | yielding acceleration |
steel. | 屈服区 | yield zone |
tech. | 屈服区 | yield region |
tech. | 屈服区 | creep zone |
tech. | 屈服单位 | yield unit |
tech. | 屈服占 | yield point |
dril. | 屈服压力 | yield pressure |
tech. | 屈服压力强度 | yield compression strength |
shipb. | 屈服压力强度 | yield compressive strength |
tech. | 屈服变形 | yielding deformation |
tech. | 屈服后刚度 | post-yielding stiffness |
tech. | 屈服后延性 | post-yield ductility |
tech. | 屈服后性状 | post-yielding behaviour |
tech. | 屈服后性状 | post-yielding behavior |
tech. | 屈服后性能 | post-yielding behaviour |
tech. | 屈服后性能 | post-yielding behavior |
tech. | 屈服后效应 | post-yielding effect |
met. | 屈服后断裂力学 | post-yield fracture mechanics |
archit. | 屈服子 | yield |
earth.sc. | 屈服安全因数 | yield safety factor |
dril. | 屈服安全因素 | yield safety factor |
earth.sc. | 屈服安全系数 | yield safety factor |
tech. | 屈服带 | yield band |
tech. | 屈服平台 | yield point jog |
tech. | 屈服平台 | yield point elongation |
expl. | 屈服应力材料开始进人塑性变形时的应力,单位为 MPa | yield stress |
tech. | 屈服应力 | plastic flow stress |
tech. | 屈服应力 | plastic yield stress |
met. | 屈服应力 | flow stress |
nautic., tech. | 屈服应力强度 | yield stress strength σ₀ |
auto. | 固体屈服应力 | yield stress |
earth.sc. | 屈服流动应力 | flow stress |
avia. | 屈服应力 | yielding stress |
tech. | 屈服应力值 | yield value of stress |
dril. | 屈服应力扩散接合 | yield stress diffusion bonding |
tech. | 屈服应力比 | yield-stress ratio |
auto. | 屈服应力粘结应力大于屈服点时压力作用下的表面粘结 | yield stress controlled bonding |
tech. | 屈服应力黏结 | yield stress controlled bonding (在高于屈服点应力的压力作用下进) |
railw. | 屈服应变 | yield strain (应力) |
tech. | 屈服弯矩 | yield bending moment |
avia. | 屈服强度 | yield strength (使材料产生永久变形初始指示的载荷值。它是材料开始表现出应力与应变不成比例到达一定偏差的应力点) |
met. | 屈服强度 | offset stress |
met. | 屈服抗屈,软化强度 | yield strength |
met. | 屈服强度 | yield strength (【技】材料开始产生宏观塑性变形所需的应力,表示材料抵抗塑性变形的能力。材料有明显屈服点时,屈服强度等于屈服点相对应的应力。) |
railw. | 屈服强度 | yield point |
tech. | 屈服强度 | yielding intensity |
gen. | 屈服强度 | proof strength |
steel. | 屈服强度 | yield stress |
steel. | 屈服强度 | yield intensity |
gen. | 屈服强度法 | limite elastique |
tech. | 屈服强度下限 | lower limit of yield strength |
railw. | 屈服强度/抗拉强度 | yield |
tech. | 屈服强度比 | yielding strength ratio |
met. | 屈服强度理论 | theory of yield strength |
avia. | 屈服强度载荷因数 | yield strength load factor |
met. | 可屈服性 | yieldability |
auto. | 屈服性的 | yielding |
nautic., tech. | 屈服性的流动性的,可压缩性的 | yielding |
tech. | 屈服性能 | yield behaviour |
met. | 屈服性能 | yieldability |
tech. | 屈服性能 | yield behavior |
tech. | 屈服扩散 | yielding spreading |
tech. | 屈服挠度 | yielding deflection |
nautic., tech. | 屈服损坏 | yield failure |
tech. | 屈服支承 | yield support |
met. | 屈服效应 | yield effect |
tech. | 屈服曲率 | yielding curvature |
met. | 屈服曲线 | yielding curve |
steel. | 屈服曲线 | yield curve |
tech. | 屈服机构 | yielding mechanism |
auto. | 屈服生长,塑性能量条件 | yielding condition |
tech. | 屈服条件 | yield condition (试验材料的弹性弯度等) |
tech. | 屈服极限 | offset limit |
wind. | 屈服极限: | offset limit |
tech. | 屈服极限 | yields point |
expl. | 屈服极限使岩土产生明显塑性变形所需的最小应力值 | yield limit |
auto. | 屈服极限点 | yield limit |
gen. | 屈服极限 | yield-limit |
met. | 屈服极限 | yield value |
met. | 屈服极限 | yield stress (point) |
met. | 屈服极限 | flow limit |
avia. | 屈服极限 | yield |
gen. | 屈服极限 | limite elastique |
dril. | 屈服极限值 | yield limit |
auto. | 屈服极限储备系数 | yield factor |
tech. | 屈服极限安全系数 | yield factor |
expl. | 屈服极限曲线 | yield limit curve |
avia. | 屈服极限流动性范围 | yield limit |
tech. | 屈服概率 | probability of yielding |
avia. | 屈服温度 | yield point |
road.wrk. | 屈服流动点 | yielding point |
auto. | 材料屈服点 | yield point |
tech. | 屈服点 | creep point |
tech. | 屈服点 | flow limit |
tech. | 屈服点 | limit of yielding |
met. | 屈服流动,软化点 | yield point |
met. | 屈服点 | yielding point (【技】在拉伸试验中,材料所受应力达到某一临界值时,应力不增加但应变继续增加,这种现象叫屈服。开始发生屈服现象时的应力叫屈服点。) |
met. | 屈服点 | yield stress (point) |
wind. | 屈服点 | breakdown point |
wind. | 屈服点 | ductility limit |
compr. | 屈服点 | proof stress |
tech. | 屈服点 | yield limit (流限) |
tech. | 屈服点 | yields point |
tech. | 金属的屈服点 | point of fluidity |
tech. | 屈服点 | yield point |
avia. | 屈服点 | limit of proportionality |
avia. | 屈服点 | yield point (永久地使某种材料变形所需应力值的量度。当一种材料加载超过它的屈服点或弹性极限的应力后,卸除应力后它将不能恢复原来的形状和大小,材料的屈服点比它的弹性极限稍高些) |
comp. | 屈服点土壤 | yield value |
gen. | 屈服点 | time-yield |
nautic., tech. | 屈服点流动点 | yield point |
gen. | 屈服点 | yield-limit |
gen. | 流动屈服点值 | flow-limit |
tech. | 屈服点与推力强度之比 | ratio of yield point to tensile strength |
met. | 屈服点伸长 | yield point elongation |
tech. | 屈服点伸长 | elongation of yield point |
met. | 屈服点伸长率 | yield point elongation |
auto. | 屈服点前的应变 | pre-yield strain |
tech. | 屈服点力 | yield point force |
tech. | 屈服点升高 | rise of yield point |
expl. | 屈服点压力 | yield pressure |
tech. | 屈服点变形 | yield point strain |
tech. | 屈服点应变 | yield sign strain |
tech. | 屈服点延伸 | yield point elongation |
auto. | 屈服点延伸率 | yield point elongation |
tech. | 屈服点强度 | yield point strength |
polym. | 屈服点形变 | deformation at yield |
dril. | 屈服点/性粘度 | yield point/plastic viscosity |
polym. | 屈服点拉伸强度 | tensile strength at the yield point |
met. | 屈服点时滞 | time delay of yield point |
met. | 屈服点时滞现象 | time delay of yield point |
tech. | 屈服点楼层剪切系数 | story shear coefficient at yield state |
tech. | 屈服点楼层剪力系数 | story shear coefficient at yield state |
tech. | 屈服点荷载 | yield point load |
expl. | 屈服点试验 | yield point test |
tech. | 屈服烈度 | yield seismic intensity |
tech. | 屈服特性 | yield characteristics |
tech. | 屈服状况 | yield condition |
tech. | 屈服状态 | yield condition |
tech. | 屈服状态楼层剪力 | story shear force of yield state |
tech. | 屈服率 | yield rate |
met. | 屈服现象 | yielding phenomenon |
met. | 屈服现象 | yield phenomenon |
tech. | 屈服界线 | yield curve |
archit. | 屈服的 | yielding |
gen. | 屈服的 | prostrate |
tech. | 屈服力矩 | yield moment |
tech. | 屈服破坏荷载 | failure load by buckling |
tech. | 屈服程度系数 | yielding level coefficient |
tech. | 屈服稳定性 | buckling stability |
tech. | 屈服类型 | yielding pattern |
tech. | 屈服线 | crack line |
tech. | 屈服线法 | yield line method |
tech. | 屈服结构 | yielding structure |
gen. | 屈服者 | genuflector |
met. | 屈服能力 | yieldability |
tech. | 屈服荷载 | yield loading |
busin. | 屈服衰退 | yield failure |
tech. | 屈服试验 | high-level testing |
auto. | 屈服载荷引起残余变形的载荷 | yield load |
dril. | 屈服载荷 | yield load |
met. | 屈服过程 | yield process |
tech. | 屈服过程 | offset procedure |
tech. | 屈服铰 | yield hinge |
tech. | 屈服铰线 | yield line |
tech. | 屈服铰线 | crack line |
tech. | 屈服铰线 | yield hinge line |
tech. | 屈服阀 | yield valve |
met. | 屈服降低机理 | yield drop mechanism |
earth.sc. | 屈服限 | yield limit |
tech. | 屈服极限 | yield limit |
met. | 屈服限以下松弛 | preyield relaxation |
polym. | 屈服面 | yielding surface |
tech. | 屈服曲面 | yield surface |
polym. | 屈雷斯卡屈服判据 | Tresca yield criterion |
met. | 平均屈服应力 | mean yield stress |
expl. | 平均屈服应力 | average yield stress |
tech. | 平行位移测条件屈服强度方法 | offset method |
polym. | 库仑屈服判据 | Coulomb yield criterion |
met. | 应力屈服 | stress yield |
met. | 应力屈服下降 | stress yield drop |
wind. | 延性屈服 | ductile yield |
auto. | 固体延性屈服 | ductile yield |
tech. | 延迟屈服 | delayed yield |
busin. | 张力屈服强度 | tensile yield strength |
expl. | 张力屈服点 | tensile-yield point |
met. | 弯曲屈服点 | bending yield point |
auto. | 弯曲应力下的屈服点 | yield point under bending stress |
tech. | 弹性屈服 | elastic yielding |
met. | 弹性屈服 | elastic yield |
tech. | 弹性屈服 | elastic buckling |
tech. | 弹簧的屈服点 | yield of spring |
tech. | 徐变屈服 | creep compliance |
polym. | 微屈服 | microyield |
tech. | 微屈服强度 | microyield strength |
tech. | 扭矩屈服限 | torque yield |
tech. | 抗屈服能力 | resistance to yield |
gen. | 抗压屈服强度 | compressive yield strength |
auto. | 抗压屈服极限 | crushing yield point |
auto. | 抗压屈服极限 | compressive yield strength |
expl. | 抗压屈服极限 | compressive yield point |
tech. | 抗压屈服点 | compressive yield point |
dril. | 抗扭屈服强度 | torsional yield strength |
met. | 拉伸屈服 | tensile yield |
polym. | 拉伸屈服伸长 | tensile yield elongation |
met. | 拉伸屈服应力 | tensile yield stress |
polym. | 拉伸屈服应变 | tensile yield strain |
busin. | 拉伸屈服强度 | yield strength in tension |
avia. | 拉伸屈服强度 | yield strength |
met. | 拉伸屈服极限 | tensile yield limit |
met. | 拉伸屈服点 | tensile yield point |
auto. | 拉伸张力屈服点 | tensile yield point |
tech. | 拉力屈服点 | tension yield point |
met. | 撕裂强度/屈服强度比 | tear-strength/yield ratio |
met. | 撕裂强度-屈服强度比 | tear-strength /yield ratio |
tech. | 时间屈服 | time yield |
polym. | 时间屈服极限 | time yield limit |
met. | 明显屈服 | sharp yield |
tech. | 明显屈服点 | sharp yield point |
met. | 明显屈服点理论 | theory of sharp yield-point |
dril. | 显微屈服强度 | microyield strength |
met. | 显微屈服点 | microyield point |
dril. | 最低屈服强度 | minimum yield strength |
nautic., tech. | 最低屈服强度 | low yield stress |
expl. | 最低屈服强度标准在当前技术经济条件下,可开采的最小煤层厚度 | minimum yield strength criterion |
dril. | 最低规定屈服应力 | minimum specified yield stress |
tech. | 最大剪切应力屈服条件 | maximum shear stress yield criterion |
met. | 最大剪应力屈服准则 | maximum shear stress yield criterion |
tech. | 最小屈服抗挤强度 | minimum yield collapsing strength |
met. | 未屈服状态 | unyielded condition |
nautic., tech. | 材料名义屈服应力 | nominal yield stress ry (N/ mm2) |
met. | 条件屈服 | offset yield (应力) |
met. | 条件屈服应力 | offset yield |
met. | 条件屈服应力 | offset yield stress |
met. | 条件屈服应力 | constrained yield stress |
met. | 条件屈服强度 | offset yield strength |
steel. | 条件屈服极限 | offset yield stress |
tech. | 条件屈服点 | constrained yield point |
tech. | 条件屈服点 | conditional yield point |
tech. | 条件屈服限 | constrained yield stress |
dril. | 极限屈服应力 | limiting yield stress |
gen. | 极限屈服点 | limiting yield point |
earth.sc. | 标准屈服、相容标号最优化和优先系统 | criteria yielding, consistent labeling optimization and precedents-based system |
nautic., tech. | 标定的最小屈服应力标定的最小屈服强度 | specified minimum yield stress |
tech. | 正割屈服应力 | secant yield stress |
met. | 残余变形屈服 | offset yield (应力) |
met. | 残余变形屈服应力 | offset yield stress |
met. | 残余变形屈服应力 | offset yield |
tech. | 残余变形屈服强度 | offset yield strength |
dril. | 泥浆屈服值 | mud yield point |
tech. | 流动屈服值 | flow limit |
tech. | 流动屈服应力 | yield stress of flow |
tech. | 流变屈服条件 | rheologic yield condition |
tech. | 滞后屈服时间 | delayed yield |
tech. | 潮汐屈服 | tidal yielding |
tech. | 特雷斯卡屈服准贝 | Tresca yield criterion |
met. | 环向内压屈服试验机 | ring-expansion tester (用环形试样做扩径试验) |
chem. | 生物屈服应力 | bioyield stress |
chem. | 生物屈服点 | bioyield point |
tech. | 畸变能屈服条件 | distortion energy yield criterion |
tech. | 盖帽屈服模型 | capped yield model |
tech. | 真屈服点 | true yield point |
auto. | 破裂屈服点 | crushing yield point |
tech. | 硬化屈服值 | hardening yield value |
tech. | 等效应力屈服条件 | equivalent stress yield criterion |
tech. | 管体屈服强度 | pipe body yield strength |
polym. | 米塞司屈服判据 | von Mises yield criterion |
polym. | 米塞司屈服条件 | Mises yield condition |
tech. | 米塞斯屈服准则 | Von Mises yield criterion |
tech. | 米赛斯屈服准则 | Mises yield criterion |
tech. | 累积屈服曲线 | cumulative yield curve |
tech. | 结构屈服 | yielding of structure |
tech. | 继续屈服 | post yield |
met. | 缓发屈服现象 | delayed yielding |
met. | 缓发屈服 | delayed yield |
met. | 缓发屈服现象 | delayed yield |
met. | 缺口屈服强度比 | notch yield ratio |
tech. | 膜壁屈服 | membrane yield |
chem. | 范围屈服 | large scale yielding |
chem. | 范围屈服 | large region yield |
tech. | 荷载屈服曲线 | resistance-yield curve |
tech. | 荷载屈服曲线 | load-yield curve |
tech. | 荷载屈服点 | yield of load |
tech. | 莫尔屈服准则 | Mohr yield criterion |
tech. | 莫尔一库仑屈服准则 | Mohr-Coulomb yield criterion |
polym. | 蠕变屈服时间 | creep yield time |
polym. | 补偿屈服强度 | off-set yield strength |
dril. | 规定最小屈服强度 | specified minimum yield strength |
expl. | 负荷屈服曲线 | load-yield curve |
met. | 负荷下屈服点 | yield point under load |
met. | 负荷下的屈服点 | yield point under load |
tech. | 超屈服 | excessive yielding |
met. | 超声波屈服应力 | ultrasonic yield stress |
tech. | 超过屈服强度的应力 | stress beyond yield strength |
tech. | 软化点屈服点 | yield point |
met. | 轴承屈服强度 | bearing yield strength |
tech. | 金属屈服 | yield of metal |
expl. | 钢材屈服强度或称屈服极限,钢材在静荷载的作用下,开始丧失对变形的抵抗能力,并产生大量塑性变形的应力。国标规定屈服点的应力作为钢材的屈服强度 | yield strength of steel |
tech. | 钢的屈服点 | yield of steel |
tech. | 钢筋屈服 | yielding of reinforcement |
met. | 钢筋屈服强度 | yield strength of rebar |
tech. | 钢筋屈服点 | yield point of steel bar |
tech. | 钢筋屈服点 | yielding point of reinforcement |
tech. | 间断屈服 | discontinuous yielding |
met. | 限定屈服强度的套管和油管 | restricted yield strength casing and tubing |
expl. | 随压力而定的屈服应力 | pressure dependent yield stress |
chem. | 霍温克三屈服值 | Houwink's three yield values |
met. | 静态屈服应力 | static yield stress |
met. | 金 预屈服松弛 | preyield relaxation |
met. | 预屈服松弛 | preyield relaxation |
earth.sc. | 额定最小屈服强度 | minimum unit yield strength |
tech. | 首次屈服 | first yield |
dril. | 高屈服值 | high-yield |
tech. | 高屈服强度冷扎的 | high yield cold-rolled |
tech. | 高屈服强度钢 | high yield stress steel |
tech. | 高屈服强度钢 | high yield strength steel |
tech. | 高屈服强度钢筋 | high yield strength reinforcement |
dril. | 高屈服性的变化 | high yielding variety |
tech. | 高屈服点 | high yield strength |
earth.sc. | 高屈服点 | high yield |
shipb. | 高屈服点 | high yield point |
archit. | 高屈服点强度钢 | high yield stress steel |
dril. | 高屈服点膨润土泥浆 | high yield bentonite |
tech. | 高屈服点钢 | high yield strength steel |
shipb. | 高屈服点钢 | high yield steel |
steel. | 高温屈服应力 | high temperature yield stress |
tech. | 黏性屈服 | viscous yielding |